NetWare 4 to 5 Update


1. The server port number specifies the TCP port that the FastTrack Server listens to for HTTP requests. What port number does the standard insecure Web server listen to?

A. 1080
B. 443
C. 80
D. 21
E. 65535

>> !
Answer: C

The standard insecure Web server port number is 80.


2. What information is stored in the NTP.CFG file?

A. The IP address of a Peer or Server
B. The IP address of a Atomic Clock
C. UNC Path to a Peer or Server
D. The frequency of time updates

>> !
Answer: A

The NTP.CFG files contains either the Peer time server IP address or a Server time server IP address.


3. In what order must the NDPS Manager and Printer Agents be created?

A. First create the Printer Agent Objects then create the NDPS Manager to manage the printers.
B. First create the NDPS Manager object, and create the Printer Agent objects from within the manager.
C. First create the NDPS Manager object, and create the Printer Agent from within the manager.
D. Create the NDPS Manager object then create the Printer Agent objects.
E. They are created at the same time when NDPS is installed.

>> !
Answer: C

You create the Printer Agents from within the NDPS Manager, remember that Printer Agents do not have NDS objects.


4. What benefit does SLP provide over the old style of SAP packets? (Choose all that apply)

A. Less bandwidth consumed for network services
B. Clients can query the database as opposed to the entire network
C. Clients can use the SLP locator product to find things quickly
D. Better time management

>> !
Answer: A & B

Because the client only has to query the database and not search the entire network, the bandwidth would be available for other things on the network.


5. Which of the following is not a component of the Compatibility Mode technology?

A. Compatibility Mode redirectors
B. Protocol Migration Agent(MA)
C. Bindery population Agent
D. Service Location Protocol (SLP)
E. Server Advertisement Protocol (SAP)

>> !
Answer: E

The Compatibility Mode technology uses a Compatibility Mode redirectors, Protocol Migration Agents, Bindery population Agent, and the Service Location Protocol. SAP was used in IPX-only environments.


6. The Service Locator Protocol uses which of the following agents? (Choose all that apply)

A. Printer Agents
B. Migration Agents
C. User Agents
D. Service Agents
E. Directory Agents

>> !
Answer: C, D & E

User, and Service Agents are automatically loaded for SLP in Netware 5, and the Directory Agent is only used in larger configurations.


7. What directory is FastTrack installed into by default on the SYS volume?

A. SYS:\Web
B. SYS:\Public\Web
C. SYS:\Public\Novonyx
D. SYS:\System\Novonyx
E. SYS:\Novonyx

>> !
Answer: E


8. What tasks need to be done to restrict access to your FastTrack Server. (Choose all that apply)

A. Create access restrictions
B. Enable auditing on your FastTrack Server
C. Bind the FastTrack Server to NDS
D. Bind the FastTrack Server to the Bindery

>> !
Answer: A & C

To set up access restrictions, you must first Bind the FastTrack Server to NDS with LDAP, then create the restrictions.


9. Which NDPS component allows you to use Resource Management Services(RMS) in a NDPS environment?

A. Gateway
B. NDPS Broker
C. Printer Agent
D. NDPS Manager

>> !
Answer: B

RMS is a portion of the NDPS Broker component that allows you to add, list, and replace resources in the NDPS environment.


10. Which button in the Help Requester windows would you choose to find information about the login name and context used to login to the network?

A. Mail
B. Call
C. Info
D. NDS
E. Help

>> !
Answer: C


11. Which wildcard character is used to match with one or more characters in the FastTrack Server Manager forms?

A. /
B. ^
C. %
D. *
E. $

>> !
Answer: D

The asterisk * is used to match with a single or more characters in a string.


12. Which Z.E.N. works policy would you configure to the Help Requester on an NT based computer?

A. Windows 95 Help Requester Policy
B. Windows NT Help Requester Policy
C. Windows NT Help Desk Policy
D. Windows NT Computer System Policy
E. Windows NT User System Policy

>> !
Answer: C

The Help Requester is configured partially by the Help Desk Policy, that is available for all the platforms, Windows 3.1x, Windows 95 and Windows NT.


13. Phase 5 of the Z.E.N. works implementation consists of what steps?

A. Plan the NDS Tree structure and implement the plan to Accommodate the Z.E.N. works objects.
B. Install Z.E.N.works on the server and upgrade the client software on the workstation.
C. Allow workstation registration information to be recorded in the NDS Tree.
D. Import the workstation objects into the NDS Tree.
E. Allow workstations to reregister in the NDS Tree.

>> !
Answer: E

Phase 5 consists of the following step, allow the workstation to reregister in the NDS Tree through users logging in to the network. Workstations must reregister so the NDS can discover the physical objects represented by the workstation objects in NDS.


14. IP Address assignments are supported by DHCP in one of what three ways?

A. Automatic Allocation
B. Dynamic Allocation
C. Manual Allocation
D. Restrictive Allocation
E. Reclusive Allocation

>> !
Answer: A, B & C

Automatic, Dynamic, Manual Allocation are all used to assign IP address to DHCP clients.


15. How can you limit access to the content on the FastTrack server without implementing NDS security?

A. Implement LDAP security on the server
B. Change the server port number
C. Implement user login security on the server
D. Change the server ip address
E. Implement a third party security system

>> !
Answer: B

Changing the port from the standard port of 80, will keep unaware people from accessing the site.


16. What wildcard character can you use to match any character except s or m, in the FastTrack Server Manager forms?

A. [-s -m]
B. [s] [m]
C. [^sm]
D. [%sm]
E. [\s\m]

>> !
Answer: C

The caret ^ enclosed in brackets [] allows you to search for all letters except the ones that immediately follow the caret symbol.


17. One of the advantages of NDPS is that SAP can be turned off and clients can communicate directly to networked printers?

A. Yes
B. No

>> !
Answer: A

NDPS allows you to print directly to a printer without the SAP protocol.


18. Which NDPS component sends notification when a printer is out of paper?

A. Gateway
B. Printer Agent
C. NDPS Broker
D. NDPS Manager
E. Printer Manager

>> !
Answer: B

The Printer Agent stores the jobs until the printer is ready to print them, and also monitors the printer for events that may happen.


19. When creating a NDPS public access printer, what NDPS components must be assigned to the printer? (Choose all that apply)

A. Gateway
B. NDPS Broker
C. NDPS Manager
D. Printer Agent
E. NDS Server Object

>> !
Answer: A & D

The Gateway and Printer Agent are assigned to a public access printer.


20. Which type of access printer provides true plug and print capabilities?

A. Controlled
B. Limited
C. Unsecure
D. Public
E. Pluggable

>> !
Answer: D

A public access printer allows for true plug and print capabilities on the network.


21. Which NDPS component controls Printer Agents?

A. Gateway
B. NDPS Manager
C. NDPS Broker
D. Printer Agent
E. NDPS Printer Manager

>> !
Answer: B

The NDPS Manager is used to control the Printer Agents.


22. When logging into the Administration Server for FastTrack Server, it is important to remember what?

A. The password is case-sensitive but the username is not.
B. The username is case-sensitive but the password is not.
C. Both the username and password are not case-sensitive.
D. Both the username and password are case-sensitive.

>> !
Answer: D

Both the username and password are case-sensitive when accessing the Administration Server.


23. Which NDPS Component Provides a bridge between NDPS clients and legacy printers

A. Gateway
B. NDPS Manager
C. NDPS Broker
D. Printer Agent
E. NDPS Bridge

>> !
Answer: A

The gateway component of NDPS is used to print from NDPS clients to older non-NDPS printers.


24. Which of the following are valid NDPS components.

A. NDPS Broker
B. Broker Agent
C. Printer Agent
D. NDPS Bridge
E. NDPS Manager

>> !
Answer: A, C & E

The NDPS Manager, NDPS Broker, Printer Agent and Gateway are the 4 components of the NDPS printing system.


25. NDPS Printer Agents represent printers as either a ______ or a ______.

A. public access printer
B. controlled access printer
C. secured access printer
D. limited access printer
E. high end access printer

>> !
Answer: A & B

Public access printers and controlled access printers can be created with a Printer Agent.


26. The minimum hardware requirements for Netware 5 are? (Choose all that apply)

A. 64 MB of RAM
B. 96 MB of RAM
C. Pentium processor
D. 500 MB free on SYS
E. 200 MB free on SYS

>> !
Answer: A, C & E

The Minimum requirements for Netware 5 are : Pentium, 64 MB, with 30 MB DOS and 200 MB SYS.


27. How would you use a wildcard character in a FastTrack Server Manager form as a simple character(non-wildcard)?

A. Precede the character with a \
B. Precede the character with a ^
C. Precede the character with a %
D. Surround the character with {}
E. Surround the character with ''

>> !
Answer: A

Preceding the character with a Backslash \ allows the character to be a simple character and not a wildcard character.


28. What NDPS Component provides the following support services: service registration, event notification, and resource management.

A. Gateway
B. NDPS Manager
C. NDPS Broker
D. Printer Agent
E. NDPS Printer Manager

>> !
Answer: C

The NDPS Broker is in charge of the support services for NDPS.


29. To set printing characteristics, like resolution and printing speed, you need to be in what dialog box?

A. Novell Printer Manager Filter
B. Novell Printer Manager
C. Novell Printer Agent
D. Novell Printer Broker
E. Novell Printer Broker Filter

>> !
Answer: A

The Novell Printer Manager Filter dialog box allows you to set settings like, the printer resolution, print speed, and duplexing capabilities.


30. Which of the following are not characteristics of the NDPS public access printers? (Choose all that apply)

A. Full range of NDS security
B. Plug and Play capabilities
C. Low security
D. Print Queues and Print Servers
E. No NDS object

>> !
Answer: A & D

NDPS public access printers are Plug and play, with low security because they do not have a corresponding NDS object, and require little administration.


31. What are the minimum rights required to install FastTrack server on a Netware server.

A. Supervisor rights to the SYS volume
B. Supervisor rights to the SYS:PUBLIC directory
C. NDS Supervisor rights to the [ROOT]
D. Read, Write rights to the SYS volume
E. Create right to the SYS volume

>> !
Answer: A

You must be have Supervisor rights to the SYS volume before you can install the Netscape FastTrack server software.


32. A public access printer has the following features?

A. Offers a full range of network security options
B. Offers a simple or automatic client installation
C. It has no corresponding NDS object
D. It provides true Plug and Print capabilities
E. Can be configured with a full range of printer configurations

>> !
Answer: C & D

A public access printer has no association with the NDS Tree and offers a Plug and Print environment.


33. What NLM needs to be loaded prior to using a NSS volume?

A. NSS.NLM
B. NSPROV.NLM
C. NSSPROV.NLM
D. NSSVOLUME.NLM
E. NSS_FS.NLM

>> !
Answer: A


34. Which one of the following servers would you most likely run SCMD /G on?

A. A server on an IP segment
B. A server on an IPX segment
C. A server on the backbone
D. A server on the Internet
E. A server connected to an IPX segment and an Appletalk segment

>> !
Answer: C

The backbone, it is assumed that the backbone is connected to all servers with either IP or IPX, SCMD /G is the gateway option, and should be run on a server with both protocols configured.


35. What command is used to start the FastTrack Server?

A. nsweb
B. webstart
C. webmgr
D. startweb
E. load fasttrack

>> !
Answer: A


36. When creating a Swap file with the Swap Add command, what default parameters will be used?

A. Min = 2, Max = Free space, Min Free = 5
B. Min = 5, Max = 58, Min Free = 2
C. Min = 2, Max = 130, Min Free = 5
D. Min = 5, Max =130, Min Free = 2
E. Min = 5, Max = Free space, Min Free = 2

>> !
Answer: A

The minimum size of the swap file is 2 MB, with the maximum being as much free space that is available, and the Min Free will cause it to always leave at least 5 meg free on the volume.


37. A NSS consumer does what?

A. Scans the server hard disk to identify and register usable free space.
B. Manages registered free space by using the deposit object.
C. Represents all the logical storage space residing on one or more storage devices.

>> !
Answer: B


38. Which type of access printer in NDPS has an associated NDS object?

A. Controlled
B. Secure
C. NDS
D. Public
E. Private

>> !
Answer: A

The Controlled Access Printer is part of NDS for added security and administrative control.


39. When disk thrashing occurs, you as an Administrator should perform what task?

A. Add more RAM to the server
B. Move the Swap File off the SYS volume
C. Turn off the Swap File
D. Replace the Hard Disk
E. Delete data from the disk

>> !
Answer: A

Adding RAM to the sever will cause the server to use less of the Swap file on the hard disk and reduce the amount of disk thrashing.


40. The gateway in a NDPS system performs what three tasks?

A. Send jobs to printers that are not NDPS-aware
B. Send print jobs to non-NDPS printing systems, such as Unix or Macintosh's
C. Send print jobs to printers that require jobs be put in queues
D. Send print jobs from non-NDPS aware clients to NDPS printers
E. Send print jobs from non-NDPS aware clients to non-NDPS printing systems

>> !
Answer: A & B, C

The NDPS gateway feature allows clients to print to non-NDPS printers and systems.


41. You are planning the upgrade your company's 3 NetWare 3.x servers to NetWare 5. You have purchased a new Pentium II based computer to be your Netware 5 server. How would you upgrade the NetWare 3.x servers to NetWare 5?

A. Using the Upgrade Wizard migrate the information from the Netware 3.x servers to the Netware 5 server.
B. Upgrade the Netware 3.x servers to 4.x, than migrate the information to the Netware 5 server.
C. Backup all the data from the Netware 3.x server, than restore the information to the Netware 5 server.
D. Launch the NetWare 5 Installation program on each NetWare 3.1x server and select the Upgrade from 3.1x or 4.1x option.

>> !
Answer: A


42. What can you drag and drop from the source tree to the destination tree in the Novell Upgrade Wizard project window when upgrading a NetWare 3.x server to NetWare 5? (Choose all that apply)

A. NDS Objects
B. Bindery Information
C. Organizational Unit
D. Volume Data
E: NDPS Printer Information

>> !
Answer: B & D

On a 3.X server you can migrate the Bindery information and the Information on the volumes.


43. What command is used to configure a NSS volume?

A. NWCONFIG
B. NSSCONFIG
C. INSTALL
D. MONITOR
E. CONFIG

>> !
Answer: A

The NWCONFIG.NLM is used to setup and configure the NSS volumes.


44. When upgrading from a Netware 4.x server to a Netware 5 server, what command is executed?

A. INSTALL.NLM
B. INSTALL.BAT
C. UPGRADE.NLM
D. UPGRADE.BAT
E. MIGRATE.BAT

>> !
Answer: B

You would run the install batch file from the NetWare 5 CD, then choose the upgrade method during the install.


45. The Resource Management Services is handled by which NDPS component?

A. NDPS Manager
B. NDPS Broker
C. Gateway
D. Printer Agent

>> !
Answer: B

RMS allows resources to be installed and accessed in a central location and the downloaded to clients, this is handled by the NDPS Broker.


46. A NSS provider does what?

A. Scans the server hard disk to identify and register usable free space.
B. Manages registered free space by using the deposit object.
C. Represents all the logical storage space residing on one or more storage devices.

>> !
Answer: A


47. Which of the following features can not be implemented when upgrading from Netware 3.X server to a Netware 5 server?

A. Block suballocation
B. Block Size
C. NDS information
D. Printer Queues
E. User Logins

>> !
Answer: A & B

You can not add the options of a different Block Size and Block Suballocation without removing the Netware partition and recreating it with the Netware 5 install program.


48. What information is stored in the Swap file on a Netware 5 server?

A. Migrated information
B. Unused NLM's that are not being accessed as frequently as other NLM's
C. RAM that isn't being accessed as frequently as other RAM
D. Unused data files that are not being accessed as frequently as other data files

>> !
Answer: C


49. What are some of the advantages to using a NSS volume? (Choose all that apply)

A. Enhanced CD-ROM support
B. RAID level 5
C. Lower memory requirement
D. Ability to have larger volumes
E. Enhanced Data Migration support

>> !
Answer: A, C & D

NSS allows for a larger volumes sizes with only 16 meg of memory needed. It also have increased the performance and use of CD-ROM's on Netware 5 servers.


50. What type of NSS provider is used for an IDE hard drive?

A. NWPRV
B. MMPRV
C. NWIDE
D. NSSIDE
E. NWSCSI

>> !
Answer: B

MMPRV is used for a IBM standard IDE hard drive.


51. What component of NSS scans for unused hard disk space and registers it?

A. Broker
B. Consumer
C. Provider
D. Storage Group
E. Manager

>> !
Answer: C

The NSS provider is used to locate and register unused hard disk space.


52. When running a FastTrack server on a Token Ring network, setting the Maximum Packet Receive Buffers to 500, and the Maximum Physical Receive Packet size to 4202 (Default for Token Ring) requires how much additional memory?

A. 1 MB
B. 2 MB
C. 3 MB
D. 4 MB
E. 5 MB

>> !
Answer: B

2 MB. Calculate the amount of memory the default setting uses. This is the Maximum Physical Receive Packet size (4202) times the Maximum Packet Receive Buffer (Default 100). Then, calculate the amount of memory the new setting uses. This is Maximum Physical Receive Packet size (4202) times the Maximum Packet Receive Buffer (Default 500). Subtract the first result from the second. This equals the amount of memory needed. 4202 * 100 = 420,200 bytes. 4202 * 500 = 2,101,000 bytes. 2,101,000 - 420,200 = 1680800 bytes or 1680 KB or 1.6 MB.


53. What file on the FastTrack Server contains all the web server configuration information, including the port number for administration?

A. SYS:\novonyx\suitespot\admin-serv\nsadmin.conf
B. SYS:\novonyx\suitespot\docs\nsadmin.conf
C. SYS:\novonyx\nsadmin.conf
D. SYS:\novonyx\suitespot\docs\admin-serv\nsconfig.ini
E. SYS:\novonyx\suitespot\docs\nsconfig.ini

>> !
Answer: A

The file nsadmin.conf, stored in the Novonyx\suitespot\docs\admin-serv directory, contains all the configuration information about the web server.


54. Besides the RConsoleJ tool, what other ConsoleOne tool allows you to access server consoles on remote Netware Servers?

A. Remote
B. Server
C. Rconsole
D. Console Manager
E. Remote Console Manager

>> !
Answer: D

The Console Manager tool and RConsoleJ both allow you to access remote server console from ConsoleOne.


55. What format must a graphic file be in before it can be used as a background on the Java Console Screen on a Netware 5 server?

A. .GIF
B. .TIF
C. .JPG
D. .BMP
E. .XPM

>> !
Answer: E

.XPM files are of the type X PIXMAPs.


56. Which portion of ConsoleOne allows you to modify settings in the AUTOEXEC.NCF?

A. Applets
B. Volumes
C. Server
D. Tools
E. Configuration Files

>> !
Answer: E

The Configuration Files portion of ConsoleOne is used to modify the Autoexec.ncf, Console.log, and Resolve.cfg.


57. When running an IPX application on an IP network, how are the packets handled?

A. The IPX packets are converted to IP packets
B. The IPX packets are encapsulated in IP packets
C. The IP packets are converted to IPX packets
D. The IP packets are encapsulated in IPX packets
E. The IP packets autosense IPX packets, so now changes need to be done.

>> !
Answer: B

IPX applications in a Pure IP network need to be encapsulated in IP packets to be transferred over the IP network.


58. Which portion of ConsoleOne would you expand to manage the file system of the server?

A. Applets
B. Configuration Files
C. Volumes
D. Server
E. Tools

>> !
Answer: C

The Volumes portion allows you to Rename, Delete, Copy, and Edit files, as well as move around the file system.


59. When using a non-standard video card in a Netware 5 server what video resolution will the JAVA Console end up with?

A. 640 X 480 with 16 colors
B. 640 X 480 with 256 colors
C. 800 x 600 with 16 colors
D. 800 x 600 with 256 colors
E. 1024 x 768 with 16 colors

>> !
Answer: A

Because it is a non-standard video card, it will default to 640 x 480 with 16 colors.


60. What command is used at the servers command prompt to start the GUI Java Console?

A. STARTJAVA.NCF
B. STARTJAVA.NLM
C. STARTX.NCF
D. STARTX.NLM
E. JAVA.NCF

>> !
Answer: C

STARTX.NCF contains JAVA.NLM as well as the mouse and video drivers needed to use the GUI interface.


61. What NDS objects can be created from within ConsoleOne on the Netware 5 server?

A. User, Group, Organization, Organizational Unit
B. User, Group, Printer, Print Queue
C. User, Group, Application
D. User, Group, Server, Volume
E. User, Group, Organizational Role, Java

>> !
Answer: A

The User, Group, Organization, and Organizational Unit NDS Objects can all be created from ConsoleOne on the Netware 5 server.


62. Where in the Java console can you run custom Java applets?

A. StartMenu, Install
B. StartMenu, Applets
C. StartMenu, Tools
D. StartMenu, ConsoleOne
E. StartMenu, Programs

>> !
Answer: B

Typically the custom Java applets are stored in the Applets option of the StartMenu.


63. How would you change the background of the Netware 5 Java Console?

A. StartMenu BackGround Option
B. StartMenu Settings BackGround Option
C. ConsoleOne BackGround Option
D. ConsoleOne Settings BackGround Option

>> !
Answer: B

The Settings Background Option off of the StartMenu allows you to change the background to water drops, pebbles or rice paper.


64. What is the Netware command to start ConsoleOne?

A. ConsoleOne.NCF
B. ConsoleOne.NLM
C. C1Start.NCF
D. C1Start.NLM
E. COneStart.NLM

>> !
Answer: C


65. What command could be run at a Netware 5 server console prompt to execute a Java applet embedded in a HTML document named BFQUIZ.HTML

A. Applet BFQUIZ.HTML
B. Load Applet -HTML BFQUIZ.HTML
C. Load BFQUIZ.HTML -JavA.Applet
D. HTML BFQUIZ.HTML -Java
E. Http:\\BFQUIZ.HTML -Applet

>> !
Answer: A

The Applet command with load the applet and have it available in that HTML page.


66. What command starts the DNS server?

A. DNSSTART
B. STARTDNS
C. NAMED
D. NAMEDNS
E. DHCPDNS

>> !
Answer: C


67. What three types of zones are available in the DNS Zone Object? (Choose all that apply)

A. Standard DNS Zone
B. IN-ADDR.ARPA Zone
C. IP6.INT Zone
D. ARPA.IN-ADDR Zone
E. Global DNS Zone

>> !
Answer: A, B & C

The DNS Zone object in NDS can represent three kinds of zones: The Standard DNS Zone, IN-ADDR.ARPA Zone, IP6.INT Zone.


68. What statement best describes FastTrack Server?

A. A server application that publishes HTML and other types of documents on the World Wide Web.
B. A server application that enhances the speed and performance of your Netware 5 server.
C. A server application that allows clients to access the Internet.
D. A server application that handles DNS and DHCP requests for clients on the network.

>> !
Answer: A

Netscape FastTrack Server is a Web Server platform, used for publishing information on the Internet and Intranets.


69. What are some requirements for installing FastTrack Server? (Choose all that apply)

A. Have an unique IP address for the Netware Server.
B. 32 MB of RAM
C. 75 MB of free disk space on the SYS volume
D. 100 MB of free disk space on the SYS volume
E - Netware 4.11 or higher

>> !
Answer: A, D & E

Hardware and Software requirements for FastTrack Server are as follows: Netware 4.11 or higher, 64 MB of RAM, 100 MB of free disk space on SYS, Long name space on SYS volume, TCP/IP bound and configured, an unique IP address, and the supervisor right to the volume.


70. Which of the following NLMS are part of the FastTrack Server software? (Choose all that apply)

A. NSHTTPD.NLM
B. WEBHTTP.NLM
C. ADMSERV.NLM
D. CRON.NLM
E. WEBFTP.NLM

>> !
Answer: A, C & D


71. You have configured your FastTrack Server and have it up and running. You start to notice that it is very busy. What settings can you change to increase performance? (Choose all that apply)

A. Decrease the value for the Maximum Simultaneous Requests
B. Increase the value for the Maximum Simultaneous Requests
C. Decrease the value for the Listen-Queue Size
D. Increase the value for the Listen-Queue Size
E. Enable Domain Name System Lookups

>> !
Answer: B & D

Increasing the Maximum Simultaneous Requests and Increasing the Listen-Queue Size, will allow your server to handle more requests at the same time, increasing performance on the server.


72. If you turn off DNS lookups, what functions of FastTrack Server will you lose? (Choose all that apply)

A. Your Web Server will not be able to access URLs.
B. Hostname Restrictions.
C. You have to access your FastTrack server with its IP address.
D. Hostnames will not appear in your log files.

>> !
Answer: B & D

Without DNS lookups, your FastTrack server will not be to resolve DNS names to IP addresses, or IP addresses to DNS names, so Hostname Restrictions will not work, and IP address will appear in your log files, instead of hostnames.


73. What is the correct URL to access a FastTrack Server named www.telifo.com, that is using a port number of 2058?

A. http://2058:www.telifo.com
B. http://www.telifo.com/2058
C. http://www.telifo.com:2058
D. 2058://www.telifo.com
E. http://www.telifo.com

>> !
Answer: C

The proper syntax for a URL with a not standard port is: http://dnsname:port# http://www.telifo.com:2058


74. From Server Manager, how do you change the FastTrack Server port number.

A. Click on Server Preferences then Network Settings, modify the value for Server Port:
B. Click on Server Preferences then Configuration, modify the value for Server Port:
C. Click on Programs then Network Settings, modify the value for Server Port:
D. Click on Server Settings then Network Settings, modify the value for Server Port:
E. Click on Configuration then Network Settings, modify the value for Server Port:

>> !
Answer: A

Once in Server Manager, Settings for the Server are in the Server Preferences Sections, under Network Settings.


75. When you initially create a NSS volume using the defaults, what two NSS volumes are created?

A. NSS_VOL
B. NSS_SYS
C. NSSADMIN
D. NSS_ADMIN
E. NSSVOL

>> !
Answer: D & E

The NSSVOL and NSS_ADMIN are created by default when you install your first NSS volume.


76. What statements about Netware 5 virtual memory are false? (Choose all that apply)

A. You can add swap files to only mounted volumes
B. You can have more than one swap file on a volume
C. You can have swap files on different volumes
D. You can not have a swap file on the SYS volume
E. You can have a swap file on the SYS volume

>> !
Answer: A, B & D

You can only have one swap file on each volume, but have multiple swap files if you have more than one volume. The SYS volume has a swap file on it by default.


77. Which NLM loads the Java Virtual Machine on a Netware 5 server?

A. JAVAVM.NLM
B. JAVA.NLM
C. JVM.NLM
D. SUNJAVA.NLM
E. NWJAVA.NLM

>> !
Answer: B


78. What NLM needs to be loaded on a Netware 5 server, before it can be remotely managed?

A. RCONAG6.NLM
B. REMOTECON.NLM
C. RCONSOLE.NLM
D. RCONSOLEONE.NLM
E. RCONAG7.NLM

>> !
Answer: A


79. What programming language was ConsoleOne written in?

A. C ++
B. JScript
C. VBScript
D. Cobol
E. Java

>> !
Answer: E


80. To add a shortcut to a frequently accessed file into ConsoleOne, what file must be modified?

A. SYS:JAVA\NWGFX\FVWM2\FVWM2RC5XX
B. SYS:JAVA\FVWM2\FVWM2RC5XX
C. SYS:JAVA\NWGFX\FVWM2RC5XX
D. SYS:JAVA\NWGFX\FVWM2\CONFIG\FVWM2RC5XX
E. SYS:JAVA\NWGFX\FVWM2\SHORTCUTS\FVWM2RC5XX

>> !
Answer: A


81. A Cname (Canonical Name) Record defines what?

A. Maps the DNS Name to an IP Address
B. Maps an Alias Name to a DNS Name
C. Maps a Mail Exchange Server
D. Maps DNS Name to a Hostname
E. Maps an IP Address to machine names

>> !
Answer: B

A Cname Record is used for alias DNS Name with a different name.


82. A MX record defines what?

A. Maps the DNS Name to an IP Address
B. Maps an Alias Name to a DNS Name
C. Maps a Mail Exchange Server
D. Maps DNS Name to a Hostname
E. Maps an IP Address to machine names

>> !
Answer: C


83. www.hitachi.com.jp is located in what country?

A. Australia
B. Germany
C. United States
D. Japan
E. England

>> !
Answer: D


84. IP6.INT Zone is used for what type of addresses on the Internet?

A. Contains records for computers in a larger company
B. Used for reverse lookup of DNS names
C. IPv6 IP addresses
D. IPv4 IP addresses

>> !
Answer: C

The IP6.INT zone type is used to resolve domain names to IPv6 IP addresses.


85. Before you can manage DNS/DHCP from within NDS, you need to first do what?

A. Run DNIPINST.NLM which will extend the Schema.
B. Run DNSINSTL.NLM which will extend the Schema.
C. Run DNIPINST.NLM which will extend the Replication Ring.
D. Run DNSINSTL.NLM which will extend the Replication Ring.

>> !
Answer: A

The NLM DNIPINST extends the schema to allow the DNS & DHCP to be managed through NDS.


86. At the time the schema is extended, what three NDS objects are created? (Choose all that apply)

A. DNSDHCP-GROUP Group Object
B. DHCP Locator Object
C. DNS Locator Object
D. DNS-DHCP Locator Object
E. RootServerInfo Zone Object

>> !
Answer: A, D & E


87. The RootServerInfo Zone Object points to what?

A. The root servers on the Internet.
B. The root servers on the Intranet.
C. The Primary Server for the Standard Zone.
D. The Primary Server for the In-Addr Arpa Zone.

>> !
Answer: A


88. What two NDS objects are added when the NDS Schema is extended for DNS/DHCP? (Choose all that apply)

A. DNS/DHCP Group Object
B. DNS/DHCP Locator Object
C. DNS/DHCP Subnet Object
D. DNS/DHCP Subnet Address Object
E. DNS/DHCP Domain Name Object

>> !
Answer: A & B

The Group and Locator Objects are created as soon as the Schema is extended.


89. What information is stored in the DNS Server Object? (Choose all that apply)

A. Zone List
B. DNS Server Options
C. Subnet Objects
D. DNS Resource Records
E. DNS Zone Transfer List

>> !
Answer: A & B

The Zone List, DNS Server Options, DNS Server IP Address, Forwarding List and No Forwarding List are all part of the DNS Server Object.


90. A SOA record in DNS references what type of system?

A. The DNS Server for that zone of authority
B. Hostname of a WINS Server to an IP address
C. Hostname of a Exchange Server to an IP address
D. Hostname of a SQL Server to an IP address
E. An Alias for another Hostname

>> !
Answer: A

SOA(Start of Authority) record points to the server for that zone.


91. The AAAA record refers to what specific type of workstation?

A. IP Address
B. IP version 6 Address
C. Mail Server
D. DNS Server
E. DHCP Server

>> !
Answer: B

The AAAA record refers to a workstation using the IPv6 Addressing scheme.


92. What command starts the DHCP service?

A. DHCPSTART.NLM
B. DHCPSRVR.NLM
C. STARTDHCP.NLM
D. DHCP.NLM
E. DHCPSRVR.NCF

>> !
Answer: B

The DHCPSRVR.NLM starts and loads the DHCP service on a Netware 5 server.


93. Which Z.E.N. Works policy would you use to remove the Run command from the Start Menu on a Windows 95 computer?

A. Windows 95 User System Policy
B. Windows 95 Computer System Policy
C. Windows 95 Start Menu Policy
D. Windows 95 Restrictions Policy
E. Windows 95 Desktop Preferences Policy

>> !
Answer: A

The Windows 95 User System Policy is used to restrict access to different parts of the Desktop, including My Computer, Network Neighborhood, and the Start Menu.


94. To use DHCP services on a network, you must complete which tasks? (Choose all that apply)

A. Assign a Netware server as a DHCP server
B. Create the DHCP server Object
C. Start the DHCP service
D. Configure the IP information
E. Create the DHCP/DNS server Object and assign permissions

>> !
Answer: A, C & D

You need to assign a server as a DHCP Server, then configure the IP information that will be leased to clients, then start the DHCP server service.


95. What basic information is stored in a Subnet Object?

A. Subnet Name, IP Address Range, Subnet Address, Subnet Mask, DHCP Server.
B. Subnet Name, NDS Context, Subnet Address, Subnet Mask, DHCP Server.
C. Subnet Name, NDS Context, Subnet Address, IP Address Range, DHCP Server.
D. DHCP Server Name, NDS Context, Subnet Address, Subnet Mask, DHCP Server.

>> !
Answer: B

Subnet Name, NDS Context, Subnet Address, Subnet Mask, and the default DHCP Server, are all basic information contained in the Subnet Object.


96. When importing a DHCP 2.0 database into a Netware 5 server, where do you import the old information into?

A. Subnet Pool object
B. Subnet object
C. DHCP server object
D. Context of the DHCP server
E. [ROOT]

>> !
Answer: D

When importing DHCP information, you import the data into the context you want the subnet object created in.


97. What command should be entered in the login script for a Windows 3.1x workstation to register into NDS?

A. IF "%PLATFORM"="WIN" Then begin #wsreg32.exe END IF
B. IF "%PLATFORM"="WIN3X" Then begin #wsreg16.exe END IF
C. IF "%PLATFORM"="WIN3X" Then begin #wsreg32.exe END IF
D. IF "%PLATFORM"="DOS" Then begin #wsreg16.exe END IF
E. IF "%PLATFORM"="WIN" Then begin #wsreg16.exe END IF

>> !
Answer: E

The command wsreg16.exe will register a Windows 3.1Xx machine into NDS, and then the PlatForm variable, will decide which version of the Operating system you are running on the workstation. WIN = Windows 3.1xX, WIN95 = Windows 95, WNT = Windows NT.


98. When using the Z.E.N. works remote control utility, which hot key sequence will size the controlled screen to the size of your screen without borders?

A. Ctrl-Alt-F
B. Ctrl-Alt-A
C. Ctrl-Alt-Shft-M
D. Ctrl-Alt-M
E. Ctrl-Alt-Shft-F

>> !
Answer: D

Ctrl-Alt-M will maximize the target computers screen to a full screen view.


99. What are the three possible ways to have registration of a workstation happen automatically? (Choose all that apply)

A. Login Script
B. Application Launcher
C. Cron.NLM
D. Z.E.N. works Scheduler
E. Z.E.N. works Start Up Policy

>> !
Answer: A, B & D

You could have the Registration agent started via the Login Script, or Novells Application Launcher or Z.E.N. works Scheduler.


100. Which method of Automatically Registering your Workstation would you use, if you haven't updated every workstation to the latest Netware Client?

A. Login Script
B. Z.E.N. works Scheduler
C. Automatic Client Update
D. Novells Application Launcher
E. Windows 95 User Policy

>> !
Answer: A

The Login Script will be executed regardless of the version of the client.


101. When viewing the settings in a Windows 95 user system policy, what does it mean when the check box is cleared (white)?

A. Registry settings will be changed back to the workstations default settings
B. Registry settings will be ignored
C. Registry settings will remain the way they are currently
D. Registry settings will be changed to the new value
E. Registry settings will be converted to the new format

>> !
Answer: A

When the check box is cleared, the setting will go back to defaults. When the check box is gray, the setting will remain the same. When the check box is marked, the setting will be changed to the new setting.


102. To set up a Z.E.N. works policy to have everyones wallpaper and screen saver be standard, you setup what type of policy?

A. Windows 95 User System Policy
B. Windows NT Computer System Policy
C. Windows 95 Computer System Policy
D. Windows 95 Desktop Preferences Policy
E. Windows NT User System Policy

>> !
Answer: D

Desktop settings like the wallpaper are controlled in the Windows 95 Desktop Preferences Policy.


103. What NDS Objects are created for the Help Desk Requester application? (Choose all that apply)

A. HDR32
B. HelpReq16
C. HelpDesk16
D. HelpReq32
E. HelpDesk32

>> !
Answer: B & D


104. What is an AOT file used for in NetWare?

A. Alias NDS Object
B. Application Object
C. All Organization Objects
D. All User Template Object
E. Automatic Operating System Template Object

>> !
Answer: B

An AOT file is used as a Application Object. It is a template used to create new Application Objects with pre-set settings.


105. Which of the following are benefits of Z.E.N. works? (Choose all that apply)

A. Application Management
B. Desktop Configuration and Management
C. Remote Control of Workstations
D. Virus Protection
E. Automatic Backups of Workstations

>> !
Answer: A, B & C

The ability to manage applications and the desktop allows for standardization, and it also allows you to Remotely control workstations to troubleshoot.


106. What are the minimum NDS rights to remotely control a workstation? (Choose all that apply)

A. Read to the workstation object properties
B. Write to the workstation object DM Remote Control Verification attribute
C. Browse to the workstation object properties
D. FileScan to the workstation object properties
E. Supervisor to the workstation object properties

>> !
Answer: A & B

You need to be able to see the workstation object and read all of its properties and write to the DN Remote Control Verification attribute.


107. Phase 1 of the Z.E.N. works implementation consists of what steps?

A. Plan the NDS Tree structure and implement the plan to Accommodate the Z.E.N. works objects
B. Install Z.E.N.works on the server and upgrade the client software on the workstation
C. Allow workstation registration information to be recorded in the NDS Tree
D. Import the workstation objects into the NDS Tree
E. Allow workstations to reregister in the NDS Tree

>> !
Answer: A

Phase 1 of the Z.E.N. works implementation consists of preparing the network and Netware for the installation of Z.E.N. works.


108. Phase 2 of the Z.E.N. works implementation consists of what steps?

A. Plan the NDS Tree structure and implement the plan to Accommodate the Z.E.N. works objects
B. Install Z.E.N.works on the server and upgrade the client software on the workstation
C. Allow workstation registration information to be recorded in the NDS Tree
D. Import the workstation objects into the NDS Tree
E. Allow workstations to reregister in the NDS Tree

>> !
Answer: B

Phase 2 consists of the steps, Install Z.E.N. works and upgrade the workstations with the latest client, and set up a workstation import policy.


109. Phase 3 of the Z.E.N. works implementation consists of what steps?

A. Plan the NDS Tree structure and implement the plan to Accommodate the Z.E.N. works objects
B. Install Z.E.N.works on the server and upgrade the client software on the workstation
C. Allow workstation registration information to be recorded in the NDS Tree
D. Import the workstation objects into the NDS Tree
E. Allow workstations to reregister in the NDS Tree

>> !
Answer: C

Phase 3 consists of the following step, Allowing the workstations to register information to be recorded in the NDS Tree.


110. Phase 4 of the Z.E.N. works implementation consists of what steps?

A. Plan the NDS Tree structure and implement the plan to Accommodate the Z.E.N. works objects
B. Install Z.E.N.works on the server and upgrade the client software on the workstation
C. Allow workstation registration information to be recorded in the NDS Tree
D. Import the workstation objects into the NDS Tree
E. Allow workstations to reregister in the NDS Tree

>> !
Answer: D

Phase 4 consists of the following step, from NetWare Admin 32, import workstation as objects into the NDS Tree


111. In which Z.E.N. works policy packages is the Search policy defined?

A. Container policy packages
B. User policy packages
C. Computer policy packages
D. Network policy packages
E. Hard Drive policy packages

>> !
Answer: A

The Container policy package contains only the Search policy.


112. Which Z.E.N. works component allows an administrator to watch an end-user perform a task?

A. Help Requester
B. Application Launcher
C. Remote Control
D. Desktop Management
E. Remote Viewer

>> !
Answer: C

The Remote Control Utility will allow an administrator to either view or take control of an end-user workstation.


113. What are possible rules for a Workstation Import Policy? (Choose all that apply)

A. Workstation object naming
B. Workstation object location in the NDS Tree
C. Workstation object Operating System type
D. Workstation object property values
E. Workstation object file system rights

>> !
Answer: A & B

The naming and location of the workstation to be imported are the only settings options for a Workstation Import Policy.


114. What feature of NAL allows you to capture the changes made to a workstation when a software package is installed, to be used for multiple installs?

A. Ghost
B. SnappShot
C. ScreenCapture
D. AppCapp
E. ImageCast

>> !
Answer: B

snAppShot is a utility used to capture a workstation configuration changes, when a software package is installed to duplicate the changes on other workstations


115. Which button in the Help Requester window would you choose to find the contact name and phone number for support?

A. Mail
B. Call
C. Info
D. Help
E. Exit

>> !
Answer: B

The call button can be used to find the contact name and phone number for reporting problems.


116. What is SLP used for?

A. SLP provides automatic resource discovery and registration over TCP/IP connections
B. SLP provides DNS names to be entered into the DNS database
C. SLP provides WINS clients with a Netbios Name Server
D. SLP provides IPX servers with a method to locate non-IPX servers
E. SLP is a subset of the Serial Line Internet Protocol

>> !
Answer: A

Service Location Protocol provides a means of discovery and registration in a TCP/IP environment, when DNS is not being used.


117. What feature of Netware 5 allows for a Plug and Play network services environment?

A. PKIS
B. SAS
C. SAA
D. DDNS
E. SLP

>> !
Answer: E

Service Location Protocol (SLP) allows for network services to be located automatically.


118. What features does SLP provide? (Choose all that apply)

A. Discover network resources
B. Creates a bridge between IP and IPX
C. Encapsulates SAP broadcasts
D. Encapsulates RIP broadcasts
E. Provides NDS and WINS integration

>> !
Answer: A & C

Service Location Protocol, is an Internet Standard used to discover network resources and it also works in IPX compatibility Mode to encapsulate SAP broadcasts.


119. SLP replaces what feature of Netware 4.11?

A. RIP/SAP
B. RIP
C. SAP
D. IP Tunneling
E. IPX Tunneling

>> !
Answer: C

SLP(Service Locator Protocol) replaces the SAP(Server Advertising Protocol).


120. What component of Netware 5 provides a plug and play environment for network services?

A. SLP
B. DDNS
C. SAP
D. RIP
E. NDPS

>> !
Answer: A

The function of Service Locator Protocol(SLP) is discovery of network services and making those services known to the Netware 5 server


121. What function of Netware 5 will encapsulate SAP packets, and discover network services?

A. DDNS
B. SAP Gateway
C. Migration Gateway
D. SLP
E. RIP Router

>> !
Answer: D

SLP provides plug and play capabilities for network services as well as providing backwards compabilities with SAP traffic.


122. For larger networks, why would you use a SLP Directory Agent?

A. To provide scaling and enterprise visibility of services.
B. To maintain the list of Directory Trees on the network.
C. To provide scaling and features to the Directory Tree.
D. To provide the ability to access anything on the network from anywhere.

>> !
Answer: A

The Directory Agent is used in Large companies to keep track of, and allow for possible growth for the company.


123. What benefits are there to a NSS volume? (Choose all that apply)

A. Mount even large server volumes in seconds
B. Greatly decrease the amount of time to mount SYS
C. Increase maximum file size restrictions to 8 terra bytes
D. Decrease the need for third party HBA drivers

>> !
Answer: A & C

Novell Storage Services is a powerful new file system built with the following benefits : Mount even large server volumes in seconds, virtually eliminate limits on number or size of files, increase single file size to 8 terra bytes, read and save data using current and future storage technologies.


124. NSS volumes are ideal for systems with large files or large number of volumes, directories, and files. A NSS volume allows a file size of up to 8 ______ in size and holds up to 8 ______ of files in a directory.

A. Terabytes, Terabytes
B. Exabytes, Exabytes
C. Exabytes, Terabytes
D. Terabytes, Exabytes
E. Megabytes, Megabytes

>> !
Answer: D


125. With a NSS volume, you can now have up to ______ files open simultaneously.

A. 100,000
B. 10,000
C. 1,000,000
D. 10,000,000
E. 100,000,000

>> !
Answer: C

You can have up to 1,000,000 files open simultaneously, so this increase work capacity and efficiency.


126. Which of the following is a true limitation of a NSS volume?

A. Can only contain 1,000,000 files in a volume
B. Can only have one NSS volume per hard disk
C. Can only have as the largest a 8 gigabyte file size
D. Can not be the SYS volume
E. Needs more RAM to use than a traditional Netware volume

>> !
Answer: D

A NSS volume can not be the SYS volume. It can hold up to a trillion files per volume, 253 volumes are the limit, It can contain a 8 Terabyte file size and uses much less RAM than a traditional volume.


127. You have installed a Netware 5 network, with a 100 user license. You want to upgrade the license count by 250 more licenses. Where in the NDS tree do you go to add the additional licenses?

A. Novell+Netware 5 Server+100 object
B. Novell+Netware 5 Conn SCL+100 object
C. The organization or organizational unit that contains the other license
D. The [ROOT} of the tree
E. The License Object

>> !
Answer: C

When adding additional licenses, you add them to the container that contains the original licenses.


128. What object must be assigned to the Organization Unit object, to allow users in that container and sub-container to login to a server?

A. License container object
B. License certificate object
C. User object
D. Workstation object
E. Container object

>> !
Answer: B

You must have license certificate assigned to the container that contains the users that need to login.


129. To exclusively assign licenses to a collection of users, you assign the license object to what NDS objects? (Choose all that apply)

A. Users
B. Organization Units
C. Organizations
D. Groups
E. [ROOT]

>> !
Answer: A & D

Users and groups can be assigned to a group of licenses for exclusive access to those licenses.


130. When Netware is installed, what two license objects are added to the NDS tree?

A. License container objects
B. License certificate objects
C. License manager objects
D. License broker objects
E. License agent objects

>> !
Answer: A & B