NT Workstation1. When logging onto a NT 4.0 domain, what are the three required parameters? A. Computer B. Name C. Password D. Domain E. Workgroup
2. Which selection passes data to, and receives load and configuration parameters from the registry? A. HAL.DLL B. NTOSKRNL C. Device Drivers D. Executive Services E. NTLDR
3. What is the Windows NT 4.0 configuration database called? A. SYSTEM.INI B. CDB C. WIN.INI D. Registry E. SAM
4. Which file contains information describing each modem supported by RAS and is used to configure initialization strings, compression, speaker, flow control, connect strings, detect string, etc.? A. RASPHONE.PBK B. SERIAL.INI C. SWITCH.INF D. PAD.INF E. MODEM.INF
5. The RAS DEVICE.LOG can be very helpful in doing which of the following? A. troubleshooting the RAS directory settings B. troubleshooting the RAS Control Panel Modem settings C. troubleshooting the RAS Registry settings D. troubleshooting RAS hardware problems between the system and the modem
6. The users' personal phonebook is created using which file? A. B. C. RAS generated D. E. User.ras
7. Security settings on the NT RAS Client can be configured in the security section of Remote Access Phonebook. What are the four Security options? A. Accept any authentication including clear text B. Accept any remote RAS callback authentication C. Use clear text Terminal login only D. Accept only encrypted authentication E. Accept only Microsoft encrypted authentication
8. You are troubleshooting a RAS problem and view the DEVICE.LOG, which does not show the modem responding. What could possibly be the problem? (Choose all that apply) A. There is a hardware configuration problem with the modem B. The RAS is configured for the wrong modem C. The RAS Server does not call you back D. Your RAS 14.4 modem flipped over to the undocumented 28.8 modem settings E. The DEVICE.LOG has collected incorrect data
9. Which file contains information about the currently configured COM ports. This includes information about the device attached to the ports? A. RASPHONE.PBK B. SERIAL.INI C. SWITCH.INF D. PAD.INF E. MODEM.INF
10. Which of the following will be useful for troubleshooting RAS? (Choose all that apply) A. Remote Access Monitor B. RASGLOSS.HLP C. Event Viewer D. PPP.LOG E. DELETED.SAV
11. The NT 4.0 Workstation RAS can support up to how many simultaneous connections? A. 1 B. 2 C. 8 D. 16 E. 128
12. By configuring a Registry value which file can be created to track information regarding RAS accessing the Modem? A. DEVICE.LOG B. ERROR.LOG C. TRACK.LOG D. PPP.LOG E. HARDWARE.LOG
13. Which NT Print Monitor DLL handles output to HP network interface printing devices? A. PSCRIPT.DLL B. RASDD.DLL C. LOCALMON.DLL D. HPMON.DLL E. WINPRINT.DLL
14. Which settings or components are missing or corrupt when a remote print job does not show up on the printer, and no error message is generated? A. Configuration B. Print.ini C. Local printing device D. Router E. Spooler
15. The primary NT Print Processor uses which of the following because this type of data is ready for the printer? A. ASCII B. RAW data C. NT journal files D. Text E. Graphics
16. The NT printing architecture requires two dynamic link libraries and a printer specific component. What consists of the user interface and configuration management portion used by an administrator? A. PRINTER GRAPHICS DRIVER B. PRINTER INTERFACE DRIVER C. CONFIGURATION FILE OR MINI-DRIVER D. UNIVERSAL RASTER PRINTER DRIVER E. UNIVERSAL POSTSCRIPT PRINTER DRIVER
17. Under NT printing, a logical port is defined as what? A. A physical connection to a printing device B. Nothing, logical ports are DOS-based and no longer supported under NT 4.0 C. A serial or parallel connection, such as COM1: or LPT1: D. A network connection to a remote print server or network-interface printing device
18. Which NT Print Monitor component handles redirection output to LPTx, COMx, FILE:, Remote Print Shares and Named Pipes? A. PSCRIPT.DLL B. RASDD.DLL C. LOCALMON.DLL D. HPMON.DLL E. WINPRINT.DLL
19. What would you do to configure the print spooler to use a partition other than the default boot partition? A. Add the value DefaultSpoolDirectory to the Registry B. Add the DefaultSpoolDirectory value using to the RegistryType REG_SZ C. Set the new value to the new spool path in the Registry D. Use HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\ Print\Printers E. Use Print Manager to adjust the spoolers print path
20. The NT printing architecture requires two dynamic link libraries and a printer-specific component. What consists of the rendering and managing portion of the driver which is always called by GDI? A. Printer graphics driver B. Printer interface driver C. Configuration file or mini-driver D. Universal raster printer driver E. Universal Postscript printer driver
21. What is the Windows 3.1 mini-driver that was written for the Windows 3.1 and can be ported over to NT 4.0 with very few changes? A. RASDD.DLL B. PSCRIPT.DLL C. RASDDUI.DLL D. PSCRPTUI.DLL E. UNIDRV.DLL
22. What is the directory where NT stores spool files while a print job is spooling? \winnt_root\SYSTEM32\SPOOL A. \SPOOLFILES B. \PRINTERS C. \RTPROCS D. \DEVICES E. \WINPRINT
23. What is a hardware connection such as LPT1 or COM2 between the local computer and a printing device? A. Printing device B. Printer C. Printing system D. Print spooler E. Physical port
24. There are several switches that can be added to the end of the NT 4.0 operating system entries in the BOOT.INI file. Which switch causes the system to boot using the standard VGA display driver? A. /VGA B. /BASEVIDEO C. /BASEVGA D. /NOSVGA E. /VGAONLY
25. Which files, if missing, could cause a NT 4.0 boot process to fail? A. NTLDR B. WIN.INI C. BOOT.INI D. SYSTEM.INI E. OS2SS.EXE
26. How would you implement the default desktop settings if a user configures the desktop to an unusable state? A. Use NT 4.0 User program to delete the user's profile B. Use Start - Settings - Control Panel - System to delete the user's profile C. Use NT 4.0 User Manager program to delete the user's profile D. Use NT 4.0 Client Administrator program to delete the user's profile E. Use NT 4.0 Registry Editor program to delete the user's profile
27. Which hidden files are used to boot a NT 4.0 Workstation 4.0 on an Intel-based platform? A. BOOTSECT.DOS B. NTDETECT.COM C. IBMDOS.SYS D. NTLDR E. NTBOOTDD.SYS
28. You are troubleshooting a RAS problem and view the DEVICE.LOG, which does not show the modem responding. What could possibly be the problem? (Choose all that apply) A. There is a hardware configuration problem with the modem B. The RAS is configured for the wrong modem C. The RAS Server does not call you back D. Your RAS 14.4 modem flipped over to the undocumented 28.8 modem settings E. The DEVICE.LOG has collected incorrect data
29. When you are setting up NT, what are possible reasons why the setup program could not detect your network card? (Choose all that apply) A. The network card is not installed properly B. Certain network cards are not detectable by NT 4.0 Setup C. You did not use the /DETECT command line switch when you started NT 4.0 Setup D. There is an IRQ conflict with the card and some other device E. NT 4.0 Setup does not detect network cards
30. When a Stop Error occurs, which program can write the entire contents of memory to the paging file and mark it with a special stamp? A. DUMP.EXE B. SAVE.EXE C. DUMPSAVE.EXE D. SAVEDUMP.EXE E. WINDBG.EXE
31. What is the NT 4.0 tool used to create an up-to-date Emergency repair Disk? A. Event Viewer B. NT 4.0 Diagnostic Utility C. System Stop Dump D. RDISK.EXE E. NT 4.0 Setup
32. When the error information has been saved, what program is used to debug the system? A. DUMP.EXE B. SAVE.EXE C. DUMPSAVE.EXE D. SAVEDUMP.EXE E. WINDBG.EXE
33. Which WinMSD Option lists all active devices and provides details about each one including DMA, IRQ and RAM information? A. DMA/MEMORY STATUS B. DRIVERS C. DRIVES D. DEVICES E. IRQ and PORT STATUS
34. There are three log files that can be viewed through the Event Viewer. Your accounting program is crashing repeatedly. Which Log file would you use to view the errors? A. Information B. System C. Security D. Application E. Warnings
35. When booting using Boot.ini, which path will the default operating system be loading from when the timeout reaches zero? A. Timeout Insert Path set in the Time.ini B. Default Path set in the Boot.ini C. Serial Path set in the Default.ini D. Optional path set in the Default.ini E. Parallel Path set in the Default.ini
36. While printing, you are getting a 'There is not enough room on the disk' error. What is the solution to your problem? A. Split the file into 2 pieces so the print job is not so big B. The pagefile is too big. Use Windows Explorer to delete the file C. Use Print Manager to adjust user rights so that you will have sufficient privilege D. Kill some applications so that some disk space will be free E. Move the location of the SPOOL directory to another drive with more disk space
37. During which operation is the CurrentControlSet saved and the Clone control set is created and initialized but not saved? A. Kernel load phase B. Kernel initialization phase C. Service load phase D. Windows subsystem start phase E. Automode load sequence
38. When are the two times that the system will attempt to load the LastKnownGood configuration? A. A new certified resource driver is added to the system expanding resources B. System is recovering from a SEVERE or CRITICAL device driver loading error C. User requests the LastKnownGood configuration be loaded D. The user reboots without shutting down properly E. Power has been lost and the computer is restarted
39. There are three log files that can be viewed through the Event Viewer. Which Log file contains auditing events when auditing is enabled? A. information B. system C. security D. application E. warnings
40. When a Stop error occurs, which program will write the entire contents of RAM to the hard disk pagefile.sys and place a special stamp on the file? A. SAVE.EXE B. SAVEDUMP.EXE C. DUMP.EXE D. WINDBG.EXE E. CRASH.EXE
41. If the power is not restored before MessDelay expires, what UPS operation does NOT happen at that moment in the process? A. The computer is shut down B. A PoerBack message is sent to all users that have session on the server C. A PowerBack message is sent to all local users D. A PowerBack alert is sent to the administrator
42. Which WinMSD option contains operating system information such as the registered owner and the date of installation? A. SERVICES B. DRIVERS C. OS VERSION D. HARDWARE E. MEMORY
43. What contains the former CurrentControlSet configurations and include the LastKnownGood as well as failed configurations? A. Clone B. ControlSet00x C. LastKnownGood D. CurrentControlSet E. Start Phase
44. If changes result in a failed boot sequence, the CurrentControlSet is copied to the next available ______. A. Clone B. ControlSet00x C. LastKnownGood D. ControlSet E. Start Phase
45. During which operation is the power on self test routines run? A. Intel pre-boot sequence B. Boot sequence for Intel computers C. RISC pre-boot sequence D. OS load phase E. Intel post-boot sequence
46. There are several switches that can be added to the end of the NT 4.0 operating system entries in the BOOT.INI file. Which switch disables serial mouse detection on the specified COM ports? A. /NOSERIALMICE:COMx B. /MICE:NO C. /NOSERIAL:1 D. /NOMICE:YES E. /MOUSE:0
47. During which operation , if the nonvolatile RAM is invalid or blank, will the firmware either query the user for the boot device or default to a floppy or hard disk sequence? A. Intel pre-boot sequence B. Boot sequence for Intel based computers C. RISC pre-boot sequence D. Boot sequence for RISC-based computers E. Automode load sequence
48. Which WinMSD Option provides a list of all ports within the NT 4.0 Workstation and the devices that are using them? A. DMA/MEMORY STATUS B. PORT STATUS C. NETWORK D. DEVICES E. IRQ and PORT STATUS
49. Which WinMSD Option displays variables for the process, system and user environments? A. DMA/MEMORY STATUS B. IRQ and PORT STATUS C. ENVIRONMENT D. DEVICES E. IRQ STATUS
50. Which WinMSD Option contains a list of services in the CurrentControlSet with a status of running or stopped? A. SERVICES B. DRIVERS C. DRIVES D. DEVICES E. IRQ and PORT STATUS
51. Once the system has finished initialization, and a user logs on, the ______ information is copied to a ControlSet and referenced by LastKnownGood. A. Clone B. ControlSet00x C. Registry D. CurrentControlSet E. Start Phase
52. Which is a temporary storage place for Registry values while NT 4.0 is initializing? A. Clone B. ControlSet00x C. LastKnownGood D. CurrentControlSet E. Start Phase
53. If your print job starts printing incorrectly with PostScript text, which of the following would you do? A. Verify that the correct print spooler is installed and configured properly B. Verify that the correct print driver is installed and configured properly C. Verify that the correct print manager is installed and configured properly D. Verify that the correct print monitor is installed and configured properly E. Verify that the correct print PostScript font is installed and configured properly
54. The Emergency Repair disk is computer-specific. Why? A. it is created only to identify hard disk drivers and the hard disk size B. it is created specifically for the computer's hardware C. it is created only to identify the monitor type and graphics card D. it is created only to identify mouse drivers and graphics card drivers E. it can be used in any NT 4.0 machine
55. With this ErrorControl level, the boot sequence will ignore the error and proceed, but an error message will be displayed. What is the level? A. 0x3 Critical B. 0x2 Severe C. 0x1 Normal D. 0x0 Ignore
56. There are three log files that can be viewed through the Event Viewer. Which Log file contains events generated by software? A. INFORMATION B. SYSTEM C. SECURITY D. APPLICATION E. WARNINGS
57. Which Event Detail statements are true? (Choose all that apply) A. You can view more information than is displayed in the Event Viewer main view B. The Event Detail Dialog box shows a text description of the selected event C. All events generate a text description and place the data in the Dialog Box D. The event data is not saved if you archive a log in log file format E. The event data is discarded if you archive it in text format
58. What allows administrators to configure NT 4.0 to perform specified tasks in the event of a Stop error? A. SAVEDUMP B. System Stop Dump C. WINDBG D. Stop error E. DEBUG
59. What is the program that comes in the support directory on the NT 4.0 CD-ROM can be used by a support engineer to debug the system? A. SAVE.EXE B. SAVEDUMP.EXE C. DUMP.EXE D. WinDBG.EXE E. CRASH.EXE
60. During which operation is the registry hardware list is created, using the information from OSLOADER.EXE for RISC based computers? A. Kernel load phase B. Kernel initialization phase C. Service load phase D. Kernel load sequence E. Automode control phase
61. Booting from the LastKnownGood configuration provides a way to recover from which problems? (Choose all that apply) A. A missing BOOT.INI file B. User modified Registry values that prevent the system from booting properly C. A malfunctioning hardware device D. A new driver added to the system that is causing problems E. A missing NTLDR file
62. There are three log files that can be viewed through the Event Viewer. You have just installed a new system and are receiving errors from a failure on the hardware drivers. Which Log file would you use to view the driver? A. INFORMATION B. SYSTEM C. SECURITY D. APPLICATION E. WARNINGS
63. When is a NT 4.0 Workstation setup configuration considered good? A. When the computer powers up B. When the application software loads C. When the operating system loads D. When the user completes the logon process E. When the users prints from the application
64. Which ErrorControl value will display a message and fail the boot sequence if the LastKnownGood is being used and an error occurs? A. 0x3 Critical B. 0x2 Severe C. 0x1 Normal D. 0x0 Ignore
65. Which WinMSD Option contains information on the ROM BIOS, the CPU Type, and the number of CPUs in the computer? A. SERVICES B. DRIVERS C. DRIVES D. HARDWARE E. MEMORY
66. If you get an error message, 'No default printer selected," what should you do? A. Use Print Manager to create a new printer, and point it towards a print server or network-interface printing device B. Go into Control Panel-Networks and add a logical printer connection C. Use NT 4.0 Setup to install a default printer D. Use Print Manager to connect to a print server or network-interface printing device E. Go home for the day and try to fix it tomorrow
67. Which WinMSD Option contains a list of drivers in the CurrentControlSet with a status of running or stopped? A. SERVICES B. DRIVERS C. DRIVES D. DEVICES E. IRQ and PORT STATUS
68. What is the NT 4.0 tool that saves the state of the computer for debugging purposes in case of a Stop error, allowing the information to be used to help locate the source of problems? A. EVENT VIEWER B. NT 4.0 DIAGNOSTICS UTILITY C. SYSTEM STOP DUMP D. CRASHDEBUG E. WINDBG
69. During which operation is it possible to display the names of the drivers being loaded on the screen by adding the /SOS switch to the BOOT.INI? A. Kernel load phase B. Kernel initialization phase C. Service load phase D. Windows subsystem start phase E. RISC pre-boot sequence
70. Which WinMSD Option specifies the pagefile.sys location, total RAM, available RAM and other information about physical and virtual RAM? A. SERVICES B. DRIVERS C. DRIVES D. DEVICES E. MEMORY
71. Which role in the boot sequence provides the information that determines what drivers and services to load and when to load them? A. Autoload's B. Registry's C. LastKnownGood's D. CurrentControlSet's E. Start Phase's
72. Which utility allows the administrator to update an existing Emergency Repair disk or create a new Emergency Repair Disk from a blank floppy? A. SAVE B. FDISK C. RDISK D. WINDBG E. REPAIR
73. Which log file would you use to troubleshoot a printing problem? A. INFORMATION B. SYSTEM C. SECURITY D. APPLICATION E. WARNINGS
74. Which statements regarding WinMSD are true? (Choose all that apply) A. WinMSD is a graphical interface diagnostic tool used to view configurations information that is stored in the Registry B. WinMSD can provide printed reports detailing system information C. WinMSD can start the SAVEDUMP program D. WinMSD allows you to modify configuration information stored in the Registry E. WinMSD can start the registry editor utility
75. During which phase is the session manager started (SMSS.EXE), which immediately reads and executes a list of programs? A. Kernel load phase B. Kernel initialization phase C. Service load phase D. Windows subsystem start phase E. Session load phase
76. Which statements relating to the Event Viewer are true? A. Log files by default save up to 512 kbytes of information B. Log files by default overwrite information after 7 days C. Log file default settings are changed by choosing Log Settings in Windows Explorer D. Log files can be saved to be sent to a support center E. Log files cannot be remotely viewed
77. Select the three log files that can be viewed through the Event Viewer. A. INFORMATION B. SYSTEM C. SECURITY D. APPLICATION E. KERNEL
78. What provides generic services that all environment subsystems can use to perform basic operating system functions? A. Thread Managers B. Process Managers C. Executive Services D. Win32 Subsystems E. POSIX Subsystems
79. What is the function of the application subsystems? A. To provide support for multiple redirectors B. To enhance the performance of network protocols C. To provide support for applications written for other operating systems D. To provide kernel services to the Hardware Abstraction Layer E. To pass all application I/O requests to the appropriate device
80. While working with Windows 3.x applications on a NT 4.0 Workstation, which two files are used for backward compatability? A. WIN.INI B. SYSTEM.INI C. Win16.SYS D. OS2SS.EXE E. WININI.SYS
81. The 16-bit subsystem in NT is implemented as a VDM (Virtual DOS Machine). What are some of its key components? (Choose all that apply) A. NTVDM.EXE B. WOWEXEC.EXE C. WOW32.DLL D. NTKERNEL.SYS E. AUTOEXEC.NT
82. What shares address space with each POSIX application and handles communication between the application and the POSIX subsystem? A. PSXSS.EXE B. POSIX.EXE C. POSIX.DLL D. PSXDLL.DLL E. STARTUP.CMD
83. What is a NT4.0 (32-bit) program that handles the communications between the POSIX subsystem and Executive Services? A. PSXSS.EXE B. POSIX.EXE C. POSIX.DLL D. PSXDLL.DLL E. STARTUP.CMD
84. What is the main component of the POSIX subsystem? A. PSXSS.EXE B. POSIX.EXE C. POSIX.DLL D. PSXDLL.DLL E. POSWIN.EXE
85. Windows 3.x based (16 bit) applications are supported by the WOW layer, running inside a VDM. What are the VDM components of WOW? (Choose all that apply) A. NTVDM.EXE B. NTVDM.DLL C. NTWIN.SYS D. NTIO.SYS E. NTDOS.SYS
86. Fill in the blanks. Support has been added in NT 4.0 for Windows 95 ______, ______ and ______, so that the appearance of certain applications has changed. A. APIs B. Common user interface C. Plug-N-Play features D. Common utilities E. Common features
87. The Registry is organized in a hierarchical structure similar to the hierarchical structure of directories and files on a DOS disk. Within this structure, which of the following is analogous to a file or files? A. SUBTREE B. VALUE DATA TYPE C. HIVE D. KEY E. VALUES
88. Where do the built in Local Groups obtain their rights or permissions? A. Rights or Permissions are obtained from the Global Group B. Rights or Permissions are obtained from the User combined with the file system Folder C. Rights or Permissions are obtained from other Local Groups D. Rights or Permissions are obtained from a predetermined set of user rights assigned by the Operating System
89. Which files should be backed up on a daily basis? A. The applications directory B. The Operating System C. The Registry D. The user's data E. The SQL database
90. In which environment, is security managed centrally, with one account database shared by all of the servers that participate in authentication? A. TCP/IP B. Subsystem C. POSIX D. Domain E. Workstation
91. On which of the following software disk configurations can you put the NT Workstation system and boot partition files? A. mirror set B. volume set C. stripe set with parity D. stripe set without parity E. No answer is correct
92. During which sequence does NTLDR read the BOOT.INI and display possible operating system selections? A. Intel pre-boot sequence B. Boot sequence for Intel computers C. RISC pre-boot sequence D. Boot sequence for RISC-based computers E. Automode load sequence
93. Which icon in the Control Panel controls the NT 4.0 Startup settings, including boot loader screen time delay, virtual memory, tasking, system environment variables, user environment variables and recovery? A. Desktop B. Devices C. Network D. Drivers E. System
94. Fill in the blank. NT 4.0 allows you to set the maximum size of the ______. A. FAT Cluster B. Redirector buffers C. System drive D. Registry E. NTFS partition
95. What is the proper way to shut down NT 4.0 Workstation? A. Press CTRL+ALT+Return and select Shutdown B. Press CTRL+ALT+TAB and select Shutdown C. Press CTRL+ALT+DEL and select Shutdown D. Press CTRL+ALT+DEL and select Exit E. Select Windows Explorer and Select Logoff
96. What would you use to change the way the system date is ordered and formatted? A. REGEDT32.EXE, the registry editor B. Control Panel - System icon C. Control Panel - Date/Time icon D. Control Panel - Regional Settings icon E. None - This is not configurable
97. Under Windows NT, what does the word 'printer' refer to? A. The physical device that does printing B. The network redirector C. The software interface between an application and an actual printing device D. The hardware interface between an application and a physical printing device E. The software interface between the local machine and the remote printer
98. How would you access the Windows NT 4.0 Workstation Help Program? A. Insert a CD-ROM into your machine and run B. Start- Help C. Books Online is not available in Windows NT 4.0 Workstation D. Start- Programs- Books Online E. Use Start-Find- WINHELP.HLP. Double click, making sure the file has the proper association.
99. The License Manager Service ______ installed on Windows NT 4.0 Workstation. A. Is B. Is not
100. What would you do to verify that NT 4.0 Workstation is the active operating system? A. Use CTRL+ALT+DEL and provide account information B. Use Server Manager. C. View the directory structure using Windows Explorer D. Use the NTADMIN utility E. Use the Group Viewer utility
101. Which icon in the Control Panel controls starting and stopping of device drivers for the NT 4.0 operating system? A. Desktop B. Devices C. Network D. Drivers E. System
102. Which of the following statements are true about 'What a process is'? (Choose all that apply) A. It is an object which includes an executable program that defines initial code and data B. It is an object which includes a private memory adress space where the process code and data are stored C. It is an object which includes an access token used by NT 4.0 Workstation to make security checks D. It is an object which includes at least one thread to execute the code and system resources such as Windows E. It is an object which includes a stack for use when running in user mode or privileged processor mode
103. Which icon in the Control Panel controls the NT 4.0 installation and removal of multimedia device drivers? A. DESKTOP B. DEVICES C. MULTIMEDIA D. DRIVERS E. SYSTEM
104. Which HKEY_LOCAL_MACHINE subkey contains file associations and OLE information? A. HARDWARE B. SAM C. SECURITY D. SOFTWARE E. SYSTEM
105. The Registry is organized in a hierarchical structure similar to that of directories and files on a DOS disk. Within this structure, what is analogous to the root directory of the DOS disk? A. SUBTREE B. VALUE DATA TYPE C. HIVE D. KEY E. VALUES
106. The Registry is organized into 4 Hives that contain per-computer and per-user configuration information. What type of configuration information do the per-user Keys include? (Choose all that apply) A. DESKTOP SETTINGS B. SOFTWARE PREFERENCES C. COMMUNICATION PORTS INSTALLED D. MULTIMEDIA DEVICE DRIVERS INSTALLED E. PRINTER SETTINGS
107. Which registry printing parameter disables the printing browse thread on the system? A. DisableServerThread B. ServerThreadTimeout C. BrowseThread D. Thread E. Browser
108. The Registry is structured into a set of four Hives. Which hive contains only two Subkeys? A. HKEY_CURRENT_USER B. HKEY_CLASSES_ROOT C. HKEY_USERS D. HKEY_LOCAL_MACHINE E. HKEY_DOMAIN_USERS
109. Which HKEY_LOCAL_MACHINE subkey is a volatile key constructed from information gathered each time the computer boots? A. HARDWARE B. SAM C. SECURITY D. SOFTWARE E. SYSTEM
110. When remote jobs get an error on a print server, how do you enable a beep notification? (Choose all that apply) A. Modifying the BeepEnabled Print Registry entry. B. Selecting beep on error warning in the Print Server property sheet. C. Modifying the BeepRetry Print Registry entry. D. Modifying the EnableBeep Print Registry entry. E. Selecting beep on error warning in the Printer property sheet.
111. The Registry is structured into a set of four hives. Which hive contains information specific to the computer that is always the same, regardless of the logged on user? A. HKEY_CURRENT_USER B. HKEY_CLASSES_ROOT C. HKEY_USERS D. HKEY_LOCAL_MACHINE E. HKEY_DOMAIN_USERS
112. When remote jobs get an error on a print server, how do you enable a beep notification? (Choose all that apply) A. Modifying the BeepEnabled Print Registry entry B. Selecting beep on error warning in the Print Server property sheet. C. Modifying the BeepRetry Print Registry entry D. Modifying the EnableBeep Print Registry entry E. Selecting beep on error warning in the Printer property sheet.
113. Which HKEY_LOCAL_MACHINE subkey contains information about the programs on the local machine that is independent of the per-user configuration information? A. HARDWARE B. SAM C. SECURITY D. SOFTWARE E. SYSTEM
114. Windows NT 4.0 stores printer configuration information in which location? A. \winnt_root\PRINT.INI B. \winnt_root\SYSTEM32\SPOOL C. The registry D. \winnt_root\SYSTEM32\SPOOL\PRINT.INI E. \winnt_root\WIN.INI
115. Which of these applets in the Control Panel can be used to increase the virtual memory values? A. Control Panel, Services B. Control Panel, Server C. Control Panel, System D. Control Panel, Desktop E. Control Panel, Devices
116. Every time you log on you get the Display Properties screen. This is caused by which incorrect setting? A. Color Palette B. Desktop Area C. Refresh Frequency D. Display Type
117. Which three of the following are on the NT emergency repair disk? (Choose all that apply) A. Config.nt B. Software.da_ C. Accounts.da_ D. NTUser.da_
118. You are running several 32-bit Windows applications at once on your Windows NT Workstation. You would like to give the applications running in the background more processor time. How can you accomplish this? A. Open the Systems applet in the Control Panel to change the priority that the foreground application receives in relation to other running applications. B. Use the 'start' command to increase the priority of a specific application. C. Minimize all applications once they are running. D. Use Performance Monitor to change the priority that the foreground application receives in relation to other running applications.
119. Your company uses an older 16-bit Windows-based application, and you have decided that you are going to run it in its own memory space. Which of the following statements identify how your system will be affected by doing this? (Choose all that apply) A. Your system will require less memory. B. Your system will require more memory. C. Your 16-bit application will not be able to communicate with other programs using shared memory. D. Your 16-bit application will be able to communicate with other programs using shared memory. E. Running a 16-bit application in its' own memory space will have no affect on your system.
120. Your company has just purchased five identical HP print devices. Your boss has asked you to set up a printer pool for the printers. Each printer is equipped with an Ethernet adapter card. Which three steps should you perform to configure the printers? (Choose all that apply) A. Install Dynamic Host Configuration Protocol (DHCP). B. Install NetBEUI on the print server. C. Install Microsoft TCP/IP Printing Services on the print server. D. Install Windows Internet Naming Service (WINS). E. Identify the IP address for each print device by running a self-test on each print device.
121. You have just installed Windows NT Workstation on your computer and have joined the CORP domain. You go into User Manager and disable the Guest account. Other people in your workgroup complain that they can't access shared resources on your computer. Why is this? A. You need to set up a user account with appropriate permissions assigned to it on your computer. B. You need to reboot your Windows NT Workstation to put your changes in effect. C. You need to grant permissions to the user's domain account. D. You will not be able to share your resources.
122. You have a Windows NT Workstation that contains two 800-MB hard drives. One disk is formatted with FAT, and the other is formatted with NTFS. A large customer database file resides on your NTFS partition, and you anticipate that the database will grow larger than the 800-MB. You plan on purchasing another 800-MB hard drive, but you don't want to reformat your existing 800-MB hard drive with NTFS. What must you do so you don't have to reformat your hard drive with NTFS? A. Create a catalog volume set B. Create a new volume set C. Extend a volume set D. Create a disk mirror set E. None of the above
123. You are running different system-maintenance utilities at once while on your Windows NT Workstation. You notice that out of all the programs that are running concurrently, only the active program is running quickly. What step should you take to give all the utilities equal priority? A. Minimize all applications once they are running. B. Use Performance Monitor to change the priority that the foreground application receives in relation to other running applications. C. Use the 'start' command to increase the priority of a specific application. D. Open the systems applet in the control panel to change the priority that the foreground application receives in relation to other running applications. E. Set the application priority level in Server Manager to 'Equal'.
124. Your boss has decided to upgrade 20 computers running MS-DOS to Windows NT Workstation. None of the computers have a CD-ROM drive, but all of the computers have the necessary hardware and software to access your local network. You do NOT want to have to install Windows NT Workstation by floppy disks, so you tell your boss that you will be doing a network installation. What two procedures must you do before you install Windows NT Workstation on these 20 computers? (Choose all that apply) A. Ensure that each computer is running MS-DOS-based networking software. B. At the command prompt, type 'WINNT /d' for DOS installation. C. Make sure that each available computer has at least 105 MB of free space and then run WINNT.EXE. D. Make sure that each available computer has at least 120 MB of free space and then run WINNT.EXE. E. You will have to install all your Windows NT Workstations by floppy.
125. You have TCP/IP installed and need to send out trap messages to another workstation. What service or protocol do you need to install? A. SNMP B. DHCP C. DNS D. WINS
126. What Control Panel applet is used to configure modems? A. Devices B. Services C. Modem D. System E. Communications
127. You want to print to a print device using the TCP/IP protocol. What two items do you need to do this? A. IP Address B. Domain Name C. Host Name D. Computer Name E. Printer Name
128. You are creating a stripe set without parity. What is the MAXIMUM number of physical hard drives you can use? A. 1 B. 3 C. 10 D. 32 E. 64
129. You would like to create a stripe set with parity on NT Workstation 4.0. What is the MINIMUM number of physical hard drives you can use? A. 1 B. 3 C. 10 D. 32 E. NT Workstation does not support stripe sets with parity
130. What utilities can you use to measure processor utilization in Windows NT Workstation? (Choose all that apply) A. Task Manager B. Services Manager C. Performance Monitor D. Control Panel\CPU E. Control Panel\Devices
|